T6 -- The water tastes or smells odd Flow 1

The water tastes or smells odd

Make sure to refresh your tank & ensure the cup is clean.

1
For T6 machines autoflush - this refreshes the tanks
More Information
Automatic flushing

Disconnect the T6 from the power supply to start this process
1. Press and hold down the Menu OK button while re-powering the unit. You should hear three short beeps.
2. Shipping Mode will appear on the display.
3. Unplig the unit from the power supply again for one second, but don't press any buttons this time, and then re-connect it.
4. Choose English Language on the screen, and confirm your selection by pressing Menu/ Ok button.
5. Place a large jug under the spout, choose the Filling Tanks option on screen and confirm by pressing the Menu/ OK button.
6. The T6 will start its Automatic Flushing Process. Simply follow the on-screen instrunctions until the process is complete.
Attention:
The flushing process will start with the hot water tank and then the cold water tank. Each process takes 2 minutes. If at any stage the jug is full, press any key to stop the flushing, empty the jug and continue by pressing the Menu/ OK button.
2
Check cup(s) – sometimes detergent can be left inside. Smell cup and visually check for residue.
3
Fill cup and re-taste water. You can also ask someone else.

The filters and UV lamps needed to keep your Water System working perfectly

De-scale your WaterBar and replace the filter every 6 months

The descaling pod contains citric salt for scale removal. When descaling your WaterBar it can’t be used for approximately six hours, it’s therefore best performed overnight. Your WaterBar needs to be de-scaled before you change your filter.

Purchase Filter Packs